LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 411 of 1904 2022-03-04
#CODECINFO:
<codec_used>,<codec_set1>[,<codec_set2>[..[,codec_setn]]]
The parameters and their format is described in the Unsolicited
code values section.
<format>=0, <codec_used> is displayed in
numeric format
Values:
full rate speech 1 on TCH
full rate speech 2 on TCH
half rate speech 1 on TCH
full rate speech 3 – AMR on TCH
half rate speech 3 – AMR on TCH
UMTS-AMR Narrow band mode