Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 470 of 1904 2022-03-04
Not Subject to NDA
<AcTtype>
integer
N/A
type of access technology.
Values:
1
:
CAT M1
2
:
GSM (A/Gb mode)
3
:
UTRAN (lu mode)
4
:
E-UTRAN (WB-S1 mode)
5
:
E-UTRAN (NB1-S1 mode)
<Req_eDRX>
string
-
half a byte in a 4-bit format. The eDRX
value refers to bit 4 to 1 of octet 3 of
the Extended DRX parameters
information element (see subclause
10.5.5.32 of 3GPP TS 24.008). For the
coding and the value range, see
Extended DRX parameters information
element in 3GPP TS 24.008, Table
10.5.5.32/3GPP TS 24.008. Default
value is "0000".
Additional info:
If <mode>=2 and there is a change in the eDRX parameters provided
by the network, the unsolicited result code reports:
+CEDRXS:
<AcTtype>[,<Req_eDRX>[,<NW_prove_DRX>[,<PagTimeWindow>]]]
Name
Type
Default
Description
<NW_prove_DRX>
string
-
half a byte in a 4-bit format.
The eDRX value refers to
bit 4 to 1 of octet 3 of the
Extended DRX parameters
information element (see
subclause 10.5.5.32 of

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English