Telit Wireless Solutions LE910C series - Page 471

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 471 of 1904 2022-03-04
Not Subject to NDA
3GPP TS 24.008). For the
coding and the value range,
see Extended DRX
parameters information
element in 3GPP TS 24.008
Table 10.5.5.32/3GPP TS
24.008.
<PagTimeWindow>
string
-
half a byte in a 4-bit format.
The paging time window
refers to bit 8 to 5 of octet 3
of the Extended DRX
parameters information
element (see subclause
10.5.5.32 of 3GPP TS
24.008). For the coding and
the value range, see the
Extended DRX parameters
information element in
3GPP TS 24.008 Table
10.5.5.32/3GPP TS 24.008.
The only '4 - E-UTRAN (WB-S1 mode)' of <AcT-type> could be
supported.
Need to input together with <AcT-type> and
<Requested_eDRX_value> values when the '1 - enable the use of
eDRX' and '2 - enable the use of eDRX and enable the unsolicited
result code' of <mode> is set. Also, it needs to be added quotation
marks if <Requested_eDRX_value> is set.
The initial value of eDRX is like as follows.
E-UTRAN (WB-S1 mode): eDRX – disabled, PTW(Paging Time
Window) size - 4, cycle length - 1
CAT M1, GSM, UTRAN and E-UTRAN (NB-S1 mode): eDRX –
disabled. PTW(Paging Time Window) size - 0, cycle length - 0