Telit Wireless Solutions LE910C series - Page 519

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 519 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Description
<number>
string
phone number of format specified by <type>
<type>
integer
type of address octet
Values:
128
:
both the type of number and the
numbering plan are unknown
129
:
unknown type of number and
ISDN/Telephony numbering plan
145
:
international type of number and
ISDN/Telephony numbering plan
(contains the character "+")
161
:
national type of number and
ISDN/Telephony numbering plan
<alpha>
string
alphanumeric representation of <number>
corresponding to the entry found in phonebook;
used character set should be the one selected
with command +CSCS
<CLI_validity>
integer
validity of CLIP
Values:
0
:
CLI valid
1
:
CLI has been withheld by the originator
2
:
CLI is not available due to interworking
problems or limitation or originating
network
in the +CLIP: response they are currently not reported either the
subaddress information (it's always "" after the 2nd comma) and
the subaddress type information (it's always 128 after the 3rd
comma).