EasyManuals Logo

Telit Wireless Solutions LE910C series At Commands Reference Guide

Telit Wireless Solutions LE910C series
1904 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #620 background imageLoading...
Page #620 background image
LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 620 of 1904 2022-03-04
Not Subject to NDA
Class 2 messages and messages in the message waiting indication group
(stored message) result in indication as defined in <mt>=1.
Acknowledge for the received SMS-DELIVER SM is sent to network immediately
when +CSMS <service> is set to '0' or when +CSMS <service> is set to
'1', acknowledge is sent via +CNMA command during predefine time-out, an
error is sent to network in case timeout expire, next +CMT response is depend
on acknowledge of current received +CMT response in case +CSMS <service>
parameter set to '1'.
<bm>=2:
PDU mode
+CBM: <length><CR><LF><PDU>
Text mode
+CBM:<sn>,<mid>,<dcs>,<pag>,<pags><CR><LF><data>
<ds>=1:
PDU mode
+CDS: <length><CR><LF><PDU>
TEXT mode
+CDS: <fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>
Acknowledge for the received SMS-STATUS-REPORT SM is sent to network
immediately when +CSMS <service> is set to '0' or when +CSMS <service> is set
to '1', acknowledge is sent via +CNMA command during pre-defined timeout, an
error is sent to network in case timeout expire, next +CDS response is depend

Table of Contents

Other manuals for Telit Wireless Solutions LE910C series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telit Wireless Solutions LE910C series and is the answer not in the manual?

Telit Wireless Solutions LE910C series Specifications

General IconGeneral
BrandTelit Wireless Solutions
ModelLE910C series
CategoryWireless modules
LanguageEnglish

Related product manuals