Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 688 of 1904 2022-03-04
Not Subject to NDA
parameters to the factory default
configuration.
"hh:mm:ss±zz" string must be used only
when issuing +CALA with parameter
<recurr>.
<n>
integer
0
index of the alarm
Value:
0
:
the only value supported
<type>
integer
1
alarm behavior type
Values:
0
:
reserved
1
:
the module wakes up fully operative as if the
ON/OFF button has been pressed. If the module is
already ON when the alarm times out, then it does
nothing.
2÷8
:
see Additional info section.
<text>
string
-
alarm code text string used in the URC
+CALA. It has meaning only if <type> is
equal to 2, 5 or 6.
<recurr>
string
N/A
sets a recurrent alarm for one or more
days in the week in the following format:
"X[,Y[,...]]"
where X, Y, ... can assume the following
values:
Values:
0
:
all days in the week
1
:
Monday
2
:
Tuesday

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English