Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 689 of 1904 2022-03-04
Not Subject to NDA
3
:
Wednesday
4
:
Thursday
5
:
Friday
6
:
Saturday
7
:
Sunday
<silent>
integer
N/A
indicates if the alarm is silent or not
Values:
0
:
the alarm is not silent
1
:
the alarm is silent
Additional info:
<type>=2
The module wakes up in "alarm mode" if at the alarm time it was
powered OFF, otherwise it remains fully operative. In both cases the
module issues an unsolicited code every 3 s:
+CALA: <text>
Where <text> is the +CALA optional parameter previously set.
The module keeps on sending the unsolicited code every 3 s until a
#WAKE or #SHDN command is received or a 90 seconds timer
expires. If the module is in "alarm mode" and it does not receive the
#WAKE command within 90s then it shuts down.
<type>=3
The module wakes up in "alarm mode" if at the alarm time it was
powered OFF, otherwise it remains fully operative. In both cases the
module starts playing the alarm tone on the selected path for the
ringer (see command #SRP).

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English