Telit Wireless Solutions LE910C series - Page 784

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 784 of 1904 2022-03-04
Not Subject to NDA
Additional info:
List of the meaning of the response message parameters.
Name
Type
Default
Description
<berrerId>
integer
-
identifies the bearer, EPS Bearer in
EPS and NSAPI in UMTS/GPRS.
<apn>
string
-
logical name used to select the
GGSN or the external packet data
network.
<ip&subnet>
string
-
IP address and subnet mask of the
MT. The string is given as dot-
separated numeric (0-255)
parameters on the form. For more
information, see next Additional info
section.
<gw_addr>
string
-
Gateway address of the MT. The
string is given as dot-separated
numeric (0-255) parameters.
<DNS_prim>
string
-
IP address of the primary DNS
Server.
<DNS_sec>
string
-
IP address of the secondary DNS
Server.
<P_CSCF_prim>
string
-
IP address of the primary P-CSCF
Server.
<P_CSCF_sec>
string
-
IP address of the secondary P-CSCF
Server.
Referring to <ip&subnet> parameter:
the string is given as dot-separated numeric (0-255) parameters. The
format is: