Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 818 of 1904 2022-03-04
Not Subject to NDA
Values:
0
:
subscribed value
1÷3
:
supported range
<Source
Statistics
Descriptor>
integer
0
specifies characteristics of the
source of the submitted SDUs for a
PDP context.
This parameter should be provided if
the Traffic class is specified as
conversational or streaming (refer
3GPP TS 24.008 [8] subclause
10.5.6.5).
3GPP Release 8 140 3GPP TS 27.007
V8.3.0 (2008-03)
Values:
0
:
characteristics of SDUs is unknown
1
:
characteristics of SDUs corresponds to a
speech source
<Signalling
Indication>
integer
0
used to indicate signalling content of
submitted SDUs for a PDP context.
This parameter should be provided if
the Traffic class is specified as
interactive (refer 3GPP TS 24.008 [8]
subclause 10.5.6.5)
Values:
0
:
PDP context is not optimized for signalling
1
:
PDP context is optimized for signalling
a special form of the Set command, +CGEQMIN=<cid> causes the
requested profile for context number <cid> to become undefined.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English