AT+CGEQMIN?
Read command returns the current settings for each defined context in
the format:
[+CGEQMIN: <cid>,<Traffic class>,<Maximum bitrate UL>,<Maximum
bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery
order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer delay>,<Traffic
handling><Source statistics descriptor>,<Signalling indication><CR><LF>]
[+CGEQMIN:...]
If no PDP context defined, it has no effect and OK result code returned.
AT+CGEQMIN=?
Test command returns as a compound value the type of the current PDP
context and the supported values for the subparameters in the format:
+CGEQMIN: <PDP_type>, (list of supported <Traffic class>s) ,(list of
supported <Maximum bitrate UL>s), (listof supported <Maximum bitrate
DL>s) ,
(list of supported <Guaranteed bitrate UL >s), (list of supported
<Guaranteed bitrate DL >s) ,(list of supported <Delivery order>s) ,(list of
supported <Maximum SDU size>s) ,(list of supported <SDU error ratio>s) ,
(list of supported <Residual bit error ratio>s) ,(list of supported <Delivery
of erroneous SDUs>s) ,(list of supported <Transfer delay>s) ,(list of
supported <Traffic handling priority>s),
(list of supported <Source statistics descriptor>s) ,(list of supported
<Signalling indication>s)[...]]
To Next Page
Loading...
Need help?
General
