Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 941 of 1904 2022-03-04
Not Subject to NDA
6
:
NAA Session Reset
7
:
Steering of Roaming
8
:
Steering of Roaming WLAN
<cmdType>=5 (SET UP EVENT LIST)
the response format:
#STGI: 5,<eventListMask>
Name
Type
Default
Description
<eventListMask>
hex
N/A
identifies the list of events to
monitor.
The <eventListMask> (two bytes
long) is a bit mask where each
bit, when set, indicates that the
corresponding event must be
monitored (e.g. if
<eventListMask> is 0x0001, it
means that MT call must be
monitored).
bit 0 = MT call
bit 1 = Call connected
bit 2 = Call disconnected
bit 3 = Location status
bit 4 = User activity
bit 5 = Idle screen available
bit 6 = Card reader status (if
class "a" is supported)
bit 7 = Language selection
bit 8 = Browser Termination (if
class "c" is supported)

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English