Telit Wireless Solutions LE910C series - Page 942

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 942 of 1904 2022-03-04
Not Subject to NDA
bit 9 = Data available (if class "e"
is supported)
bit 10 = Channel status (if class
"e" is supported)
bits 11 - 15 = reserved for future
use
Value:
0x0001÷0x01FF
:
mask
<cmdType>=16 (SET UP CALL)
the response format:
#STGI: 16,<cmdDetails>,[<confirmationText>],<calledNumber>
Name
Type
Default
Description
<cmdDetails>
integer
N/A
identifies the command
details
Values:
0
:
set up call, but only if not currently
busy on another call
1
:
set up call, but only if not currently
busy on another call, with redial
2
:
set up call, putting all other calls (if
any) on hold
3
:
set up call, putting all other calls (if
any) on hold, with redial
4
:
set up call, disconnecting all other calls
(if any)
5
:
set up call, disconnecting all other calls
(if any), with redial