Telit Wireless Solutions LE910C series - Page 836

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 836 of 1904 2022-03-04
Not Subject to NDA
<prot
num(ipv4)
/next
hdr(ipv6)
>
int
ege
r
-
The value range is from 0 to 255.
<destinati
on port
range>
stri
ng
-
The string is given as dot-separated numeric (0-65535)
parameters on the form "f.t".
<source
port
range>
stri
ng
-
The string is given as dot-separated numeric (0-65535)
parameters on the form "f.t".
<ipsec
sec
param
index
(spi)>
int
ege
r
-
The value is in hexadecimal format. The value range is
from 0 to FFFFFFFF.
<tos(ipv4)
TP
class(ipv6
)&mask>
stri
ng
-
The string is given as dot-separated numeric (0-255)
parameters on the form "t.m".
<flow
label
(ipv6)>
int
ege
r
-
The numeric value is in hexadecimal format. The value
range is from 0 to FFFFF. Valid for IPv6 only.
Additional info:
Some of the above listed attributes may coexist in a Packet Filter while
others mutually exclude each other, the possible combinations are shown in
3GPP TS 23.060 [47].
AT+CGTFT?
The read command returns the current settings for all Packet Filters for each
defined context.