Telit Wireless Solutions LE910C series - Page 935

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 935 of 1904 2022-03-04
Not Subject to NDA
one line follows for every item, repeated <numOfItems> times:
#STN: 36,<itemId>,<itemText>[,<nextActionId>]
<mode>=2, and <cmdType>=37 (SET UP MENU), the URC has the following
extended format:
the first line of output is:
#STN: 37,<cmdDetails>,<numOfItem>,<titleText><CR><LF>
one line follows for every item, repeated for <numOfItems>:
#STN: 37,<itemId>,<itemText>[,<nextActionId>]
<mode>=2, and <cmdType>=40 (SET UP IDLE MODE TEXT), the URC has the
following extended format:
#STN: 40[,<idleModeTextString>]
This Additional info section deals with the action initiated by the user (no
proactive commands activated by the SIM/USIM device).
If the call control or SMS control facility present in the SIM/USIM device is
activated, when the user application makes an outgoing call, or sends a SS or
USSD, or a SMS, the following #STN URC could be sent to indicate whether the
outgoing call has been accepted, rejected or modified by the SIM, or if the SMS
service center address or destination has been changed. For parameters
meaning refer to Unsolicited fields section.
#STN:
<cmdControlResponse>,<Result>[,<alphaIdentifier>[,<Number>[,<MODestAddr
>]]]
Unsolicited fields:
Name
Type
Description