Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 936 of 1904 2022-03-04
Not Subject to NDA
<cmdTerminateValue>
integer
is defined as <cmdType> + terminate offset.
Terminate offset = 100
<cmdControlResponse>
integer
response of the SIM/USIM device
Values:
150
:
SMS control response
160
:
call/SS/USSD response
<Result>
integer
identify the result of the Call or SMS control
performed by SIM/USIM device
Values:
0
:
Call/SMS not allowed
1
:
Call/SMS allowed
2
:
Call/SMS allowed with modification
<alphaIdentifier>
string
optional text provided by the SIM/USIM
device in ASCII format
<Number>
string
Called number, Service Center Address or
SS String in ASCII format
<MODestAddr>
string
MO destination address in ASCII format
The settings are saved on user profile and available on following reboot.
SIM/USIM Toolkit activation/deactivation is only performed at power on
according to the saved setting.
If AT#ENS=1, the <mode> parameter is set to 2.
Just one instance at a time, the one which first issued AT#STIA=<mode>
(with <mode> not equal to 0), is allowed to issue SAT/USAT commands,
and this is valid till the same instance issues AT#STIA=0. After reboot,
SAT/USAT can be used on another instance.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English