Instrument setup
R&S
®
RTO6
107User Manual 1801.6687.02 ─ 05
<Prefix>_<UserText>_<Date>_<Index>_<Time>
The prefix depends on the data type to be stored and cannot be changed by the user
.
The other elements can be enabled or disabled as required.
1.
Tap "Menu" > "Settings".
2. Select the "Save /Recall" tab.
3. Select the "Autonaming" tab.
4. To insert a user-defined text after the prefix, enter the text in the edit field. and
enable "User text".
5. If you want to exclude the prefix, current date, time or an index (serial number), dis-
able the corresponding option.
The specified elements are used to generate the default file name for the next stor-
age operation.
4.8.2 CSV export
Access: "Menu" > "Settings" key > "Save /Recall" > "CSV Export" tab.
In this dialog, you can define the format of your CSV file.
Decimal symbol
Selects if point or comma is used as a decimal symbol in the exported CSV file.
Remote command:
EXPort:RESult:DECSymbol
on page 1668
Csv delimiter
Selects the list separator symbol from a list. Available are semicolon, comma, space,
tab and colon.
Remote command:
EXPort:RESult:DELimiter on page 1668
4.8.3 External application
The R&S RT
O6 can start an external application on the instrument or in the network (if
connected) when an event occurs.
Save / recall
To Next Page
Loading...
