Remote control commands
R&S
®
RTO6
1377User Manual 1801.6687.02 ─ 05
ZVC:Z<m>:I<n>:ZERComp:USE <UseZeroComp>
Enables the automatic compensation of the measured zero of
fset.
Suffix:
<m>
.
1..2
<n> 1..4
Parameters:
<UseZeroComp>
ON | OFF
*RST: OFF
Usage: Asynchronous command
ZVC:Z<m>:I<n>:ZERComp:STATe?
Returns the status of the zero compensation of the indicated current channel.
Suffix:
<m>
.
1..2
<n> 1..4
Return values:
<ZeroCompState> ON | OFF
ON: Zero compensation is used
Of
f: Zero Compensation is not used
*RST
: OFF
Usage: Query only
Asynchronous command
24.8.8.2 Resolution and data
ACQuire:POINts:ZVALue?
............................................................................................ 1377
ACQuire:ZRESolution?.................................................................................................1378
ZVC:Z<m>:I<n>:DATA:HEADer?................................................................................... 1378
ZVC:Z<m>:V<n>:DATA:HEADer?.................................................................................. 1378
ZVC:Z<m>:I<n>:DATA[:VALues]?.................................................................................. 1378
ZVC:Z<m>:V<n>:DATA[:VALues]?................................................................................. 1378
ACQuire:POINts:ZVALue?
Returns the current record length used by the R&S RT-ZVCmulti-channel power probe
channel.
Return values:
<ZUIRecordLength> Range: 1000 to 400E6
Increment: 2
*RST: 1000
Default unit: pts
Acquisition and setup
To Next Page
Loading...
