Data and file management
R&S
®
RTO6
448User Manual 1801.6687.02 ─ 05
Load from file
Select "Open" to open the file selection dialog box, and to select the required file. See
also: Chapter 12.5, "File selection dialog", on page 482.
By default, one file names have the prefix
"OneFile_".
Remote command:
SAVeset:ONEFile:NAME on page 1648
SAVeset:ONEFile:OPEN on page 1648
Include user preferences
If enabled, the user preferences settings are also restored together with the saveset
and reference waveform. User preferences settings include the user-specific display
settings like diagram layout, toolbar, intensity and transparency settings.
Remote command:
SAVeset:ONEFile:USERpref on page 1648
12.1.3 User preferences
User preferences contain user-specific display settings like diagram layout, toolbar,
intensity and transparency settings.
12.1.3.1 Save user preferences settings
Access: "Menu" key > "Save/Recall" key > "Save" tab >
"User Preferences"
Save and recall user settings
To Next Page
Loading...
