R&S RTO6 - 24.17.13.4 Search settings

Remote control commands
R&S
®
RTO6
1973User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<Translation>
Usage: Query only
BUS<m>:MILStd:WORD<n>:TYPE?
Returns the type of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<FrameType> UNKNown | DATA | CMD | STAT | CMST | IM
CMD: command word
CMST
: command/status word
IM: inter message. Shows if there are gap errors or response
timeout.
*RST
: DATA
Usage: Query only
24.17.13.4 Search settings
The search remote commands are very similar to the trigger commands. Therefore,
search coommands are described in short, for more details, see the corresponding trig-
ger command in Chapter 24.17.13.2, "Trigger",
on page 1960.
SEARch:TRIGger:MILStd:TYPE.................................................................................... 1974
SEARch:TRIGger:MILStd:DATA:RCONdition.................................................................. 1974
SEARch:TRIGger:MILStd:CMD:RCONdition................................................................... 1974
SEARch:TRIGger:MILStd:CDST:RCONdition..................................................................1974
SEARch:TRIGger:MILStd:DATA:RMIN........................................................................... 1975
SEARch:TRIGger:MILStd:CMD:RMIN............................................................................ 1975
SEARch:TRIGger:MILStd:CDST:RMIN...........................................................................1975
SEARch:TRIGger:MILStd:DATA:RMAX.......................................................................... 1975
SEARch:TRIGger:MILStd:CMD:RMAX...........................................................................1975
SEARch:TRIGger:MILStd:CDST:RMAX..........................................................................1975
SEARch:TRIGger:MILStd:CDST:ICONdition................................................................... 1976
SEARch:TRIGger:MILStd:CMD:CCONdition................................................................... 1976
SEARch:TRIGger:MILStd:CMD:SCONdition................................................................... 1976
Protocols