R&S RTO6 - 13.25 8 b;10 b (option R&S RTO6-K590)

Protocol analysis
R&S
®
RTO6
921User Manual 1801.6687.02 ─ 05
You can define individual search parameters for the fields of the selected frame in the
table below the
"Search criteria"
. To specify these parameters, select a field in the table
and define the data and/or index operators and values, or the bit state.
For a description of how to set the search conditions, see Chapter 13.24.3.3, "SSIC
trigger settings", on page 908.
Remote command:
SEARch:TRIGger:MPHY:SSIC:ERRor<m>:ENABle on page 2325
SEARch:TRIGger:MPHY:SSIC:FIENable on page 2326
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:ENABle on page 2326
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:BIT on page 2327
SEARch:TRIGger:MPHY:SSIC:BIT on page 2327
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DMAX on page 2328
SEARch:TRIGger:MPHY:SSIC:DMAX on page 2328
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DMIN on page 2328
SEARch:TRIGger:MPHY:SSIC:DMIN on page 2328
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DOPerator on page 2329
SEARch:TRIGger:MPHY:SSIC:DOPerator on page 2329
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:ENABle on page 2326
SEARch:TRIGger:MPHY:SSIC:FRENable on page 2326
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMAX on page 2330
SEARch:TRIGger:MPHY:SSIC:IMAX on page 2330
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMIN on page 2330
SEARch:TRIGger:MPHY:SSIC:IMIN on page 2330
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IOPerator on page 2330
SEARch:TRIGger:MPHY:SSIC:IOPerator on page 2330
13.25 8b/10b (option R&S RTO6-K590)
The 8b/10b coding scheme is used for high-speed serial data transmission, used by
different standards, like fibre channel, PCIe, DVI and USB 3.0. Also the MIPI UniPro
M-PHY interface in smartphones and display interfaces such as HDMI use 8b/10b
encoding, as do base stations based on the Common Public Radio Interface (CPRI).
The R&S RTO6 can decode differential and single-ended 8b/10b signals. Furthermore,
you can search the decoded data to isolate data contents and error states such as dis-
parity violations.
You can also trigger on defined data contents and on error states.
● The 8b/10b code................................................................................................... 922
● 8b/10b configuration..............................................................................................922
● 8b/10b trigger........................................................................................................927
● 8b/10b decode results...........................................................................................930
● Search on decoded 8b/10b data...........................................................................931
8b/10b (option R&S R
T
O6-K590)