Getting started
R&S
®
RTO6
37User Manual 1801.6687.02 ─ 05
Turn clockwise to stretch the waveforms. Doing so, the scale value time/div decreases.
Press the knob to toggle between coarse and fine scale adjustment.
[Zoom]
Displays a zoom diagram for the active diagram. The key is illuminated if at least one
zoom is active. If you press the key while the zoom function is on, the "Zoom" dialog
box opens, where you can configure several zoom areas for detailed signal observa-
tion.
3.2.3.4
Vertical controls
The keys and knobs in the Vertical functional block select a signal and adjust the verti-
cal scale and position of the selected signal.
[C<n>]
T
urns on and selects a channel. If the channel is active, the key lights up in the corre-
sponding channel color
.
The effect of the keypress depends on state of the channel:
●
If channel is off: turns on the channel and selects it.
●
If the channel is on and in focus (selected): opens the corresponding channel dia-
log.
●
If the channel is on, but not in focus (not selected): selects the channel waveform.
●
If the channel is selected, and the dialog is open: turns off the channel, and closes
the dialog.
The vertical rotary knobs are focused on the selected waveform. They are illuminated
in the color of the selected waveform.
Remote command:
CHANnel<m>:STATe on page 1337
[Ref]
Opens the "Reference"
dialog box, where you can configure and display reference
waveforms. Press the key repeatedly to switch the reference waveform.
If a reference waveform is selected, the vertical rotary knobs are illuminated in white or
light gray (default colors), depending on the selected waveform.
Instrument tour
To Next Page
Loading...
