Getting started
R&S
®
RTO6
42User Manual 1801.6687.02 ─ 05
Tapping the screen works like clicking mouse buttons:
–
T
ap = click: Selects a waveform or parameter, or provokes an action.
– Double-tap = double-click: Has the same effect as touch and hold, it opens the
on-screen keyboard or keypad, or a specific editor if available.
Use gestures to scale the waveform:
– Spread or pinch two fingers horizontally to change the time scale.
– Spread or pinch two fingers vertically to change the vertical scale of the active
waveform.
●
Function keys and rotary knobs:
The front panel provides frequently used functions and controls to operate the
instrument. Use knobs to set levels and scales, and keys to initiate actions and to
open dialogs.
●
Optional mouse and/or keyboard
These devices work in the normal manner.
3.3.2 Touchscreen display
3.3.2.1 Information on the display
The touchscreen of the instrument shows the waveforms and measurement results,
and also information and everything that you need to control the instrument. All wave-
form-related display elements are shown in Figure 3-3. An overview of control ele-
ments - like dialog box, toolbar - is given in Chapter 3.3.2.2, "Control elements on the
touchscreen", on page
46.
Operating the instrument
To Next Page
Loading...
