Mixed signal option (MSO, R&S RTO6-B1)
R&S
®
RT
O6
991User Manual 1801.6687.02 ─ 05
Global skew
Sets a general delay for all digital channels. The resulting skew of a digital channel is
the sum of the general "Global skew" and the individual
"Skew".
Remote command:
BUS<m>:PARallel:DESoffset on page 2427
Skew
Sets an individual delay for each digital channel to time-align it with other digital chan-
nels. The skew value compensates delays that are known from the circuit specifics or
caused by the different length of cables. The skew between the probe boxes of the dig-
ital channels and the probe connectors of the analog channels is automatically aligned
by the instrument.
Remote command:
BUS<m>:PARallel:BIT<n>:DESKew on page 2426 (all buses)
DIGital<m>:DESKew on page 2423 (Bus1)
14.1.2 Digital resolution
Access: "Menu" > "Acquire"
If an MSO option is installed and at least one digital channel is active, additional infor-
mation appears on the "Setup" tab of the "Acquire" dialog box.
Digital channels and parallel buses
To Next Page
Loading...
