R&S RTO6 - 19.2 Overview of power measurement setup

Power analysis (option R&S RTO6-K31)
R&S
®
RT
O6
1133User Manual 1801.6687.02 ─ 05
Title Page
Adds a T
itle page to the report. The contents can be set up in the
"DUT" dialog, see
Chapter 19.1.1.2, "DUT", on page 1127.
Remote command:
POWer:REPort:CONTent:TITLe on page 2523
Measurement Setup
Adds a graphic of the measurement setup.
Remote command:
POWer:REPort:CONTent:MSETup on page 2522
Settings
Adds the settings of the analysis.
Remote command:
POWer:REPort:CONTent:SETTings on page 2522
Vertical Setup
Adds the vertical setup settings.
Remote command:
POWer:REPort:CONTent:VSETup on page 2522
Trigger Setup
Adds the trigger setup settings.
Remote command:
POWer:REPort:CONTent:TSETup on page 2522
Horizontal Setup
Adds the horizontal setup settings.
Remote command:
POWer:REPort:CONTent:HSETup on page 2522
Measured signals
Adds a diagram of the measured signal.
Remote command:
POWer:REPort:CONTent:MSIGnal on page 2522
Results
Adds the result box.
Remote command:
POWer:REPort:CONTent:RESU on page 2522
19.2 Overview of power measurement setup
Each power analysis measurement dialog box consists of the following tabs:
●
Channels
Overview of power measurement setup