R&S RTO6 - 11.4.2 Display zoom settings

Search functions
R&S
®
RTO6
440User Manual 1801.6687.02 ─ 05
Export results
Opens a dialog to define the export reults.
See Chapter 12.2.4, "Results", on page 467
.
1
1.4.2 Display zoom settings
You can display a zoom window for the currently selected search result. The zoom
area is indicated in the diagram that displays the source waveform of the search.
Show result zoom
If enabled, a zoom window is displayed for the currently selected search result. The
zoom area is indicated in the diagram that displays the source waveform of the search.
Remote command:
SEARch:RESDiagram:
SHOW on page 1636
Y mode
Defines whether absolute or relative values are used to specify the y-axis values.
Remote command:
LAYout:ZOOM:VERTical:MODE on page 1442
SEARch:RESDiagram:VERT:MODE on page 1637
Y position
Defines the y-value of the centerpoint of the zoom area.
Remote command:
LAYout:ZOOM:VERTical:ABSolute:POSition on page 1443
LAYout:ZOOM:VERTical:RELative:POSition on page 1444
SEARch:RESDiagram:VERT:ABSolute:POSition on page 1636
SEARch:RESDiagram:VERT:RELative:POSition on page 1637
Y range
Defines the height of the zoom area.
Remote command:
LAYout:ZOOM:VERTical:RELative:SPAN on page 1445
LAYout:ZOOM:VERTical:ABSolute:SPAN on page 1443
Search display presentation