R&S RTO6 - Page 1445

Remote control commands
R&S
®
RTO6
1445User Manual 1801.6687.02 ─ 05
<ZoomName> Name of the zoom diagram
Usage: Asynchronous command
LAYout:ZOOM:VERTical:RELative:SPAN <DiagramName>,
<ZoomName>,<RelativeSpan>
LA
Y
out:ZOOM:VERTical:RELative:SPAN? <DiagramName>, <ZoomName>
Defines the height of the zoom area.
Parameters:
<RelativeSpan> Range: 1E-15 to 100
Increment: 0.1
*RST: 1
Default unit: %
Parameters for setting and query:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
Usage: Asynchronous command
LAYout:ZOOM:VERTical:RELative:STARt <DiagramName>,
<ZoomName>,<RelativeStart>
LAY
out:ZOOM:VERTical:RELative:STARt? <DiagramName>, <ZoomName>
Defines the lower limit of the zoom area on the y-axis.
Parameters:
<RelativeStart> Range: 0 to 100
Increment: 0.1
*RST: 0
Default unit: %
Parameters for setting and query:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
Usage: Asynchronous command
LAYout:ZOOM:VERTical:RELative:STOP <DiagramName>,
<ZoomName>,<RelativeStop>
LA
Y
out:ZOOM:VERTical:RELative:STOP? <DiagramName>, <ZoomName>
Defines the upper limit of the zoom area on the y-axis.
Parameters:
<RelativeStop> Range: 0 to 100
Increment: 0.1
*RST: 100
Default unit: %
Waveform analysis