R&S RTO6 - 24.10.2 Reference waveforms; 24.10.2.1 Reference

Remote control commands
R&S
®
RTO6
1446User Manual 1801.6687.02 ─ 05
Parameters for setting and query:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
Usage: Asynchronous command
LAYout:ZOOM:REMove <DiagramName>, <ZoomName>
Removes the specified zoom diagram.
Setting parameters:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
Example: See Chapter 24.3.1.2, "Creating zoom diagrams", on page 1261
Usage: Setting only
Asynchronous command
24.10.2 Reference waveforms
● Reference............................................................................................................1446
● Scaling
................................................................................................................ 1448
● Waveform data export.........................................................................................1453
● Import of multichannel waveform data................................................................ 1454
24.10.2.1 Reference
REFCurve<m>:SOURce...............................................................................................1446
REFCurve<m>:STATe...................................................................................................1447
REFCurve<m>:NAME.................................................................................................. 1447
REFCurve<m>:OPEN...................................................................................................1447
REFCurve<m>:UPDate................................................................................................ 1448
REFCurve<m>:SAVE................................................................................................... 1448
REFCurve<m>:DELete.................................................................................................1448
REFCurve<m>:CLEar...................................................................................................1448
REFCurve<m>:SOURce <Source>
Selects the source waveform to be used as a reference.
Suffix:
<m>
.
1..4
Reference waveform
Waveform analysis