Waveform analysis
R&S
®
RTO6
253User Manual 1801.6687.02 ─ 05
Remote command:
REFCurve<m>:
UPDate
on page 1448
File
Opens a file selection dialog box and loads the selected reference waveform file.
Double-tap the filename to open the file selection dialog box, see also Chapter 12.5,
"File selection dialog", on page 482.
Note: Note that reference waveforms can be loaded from .bin files only. xml and csv
formats are meant for further processing in other applications.
Remote command:
REFCurve<m>:OPEN on page 1447
REFCurve<m>:SAVE on page 1448
REFCurve<m>:DELete on page 1448
Clear
The selected reference waveform disappears, its memory is deleted.
Remote command:
REFCurve<m>:CLEar on page 1448
7.2.2.2 Properties
Access: [Ref] key > "Properties" tab
A reference waveform can be scaled, stretched and positioned in the diagram. The
"Original Attributes" tab shows the original settings of the reference waveform, which
are stored together with the waveform data.
Reference waveforms
To Next Page
Loading...
