Mask testing
R&S
®
RTO6
418User Manual 1801.6687.02 ─ 05
10.4.6 Mask testing on history acquisitions
In the same way as for running acquisitions, you can set up and perform the mask test-
ing also on history waveforms.
The requirements for mask testing on history waveforms are also the same:
●
The mask is defined, see Chapter 10.4.1.1, "Creating user masks", on page
41
1
and Chapter 10.4.1.2, "Modifying user masks", on page 412.
●
The mask test is defined, see Chapter 10.4.2, "Setting up a mask test",
on page 416
●
The mask display is configured, see Chapter 10.4.3, "Configuring the mask and hit
display", on page 416.
1. Perform and finish the acquisition.
2. Press [History].
3. In the quick-access "History" dialog box, tap "Play".
The mask testing is performed on the complete history memory, starting with the
oldest acquisition. The state of the mask test is set to "Finished" when "Nx Single
count" acquisitions are tested.
For details on history, see Chapter 7.4.1, "About history", on page 274.
Working with masks
To Next Page
Loading...
