Remote control commands
R&S
®
RTO6
1323User Manual 1801.6687.02 ─ 05
Return values:
<Time>
Usage: Query only
Asynchronous command
CALibration:RESult?
Returns the result of the last selfalignment and the current alignment status. In remote
mode, *CAL? provides more detailed information.
Return values:
<ResultState>
PASSed | FAILed | NOALigndata
*RST: FAILed
Usage: Query only
Asynchronous command
24.7.6.2 Self-test
DIAGnostic:SERV
ice:STST:STATe?
Returns the summary result of the selftest.
Return values:
<State> PSSD | FAILed | UNDefined
*RST: UNDefined
Usage: Query only
Asynchronous command
24.7.6.3 Hardware
SYSTem:DFPRint
[<Path>]
The device footprint contains the configuration of the instrument, installed modules,
installed software and software licenses. This information is written in the device foot-
print xml file might be useful in case of maintenance or support request.
The query returns the information as block data. The setting command saves the
device footprint xml file in the specified path.
It is also possible to access the device footprint xml file via the instrument's web
browser. Therefore, the directory containing the xml file must be enabled for sharing.
Setting parameters:
<Path> String parameter, specifying the target path of the footprint file.
Return values:
<DeviceFootprint> Content of the device footprint xml file as block data
Instrument setup
To Next Page
Loading...
