Remote control commands
R&S
®
RTO6
2204User Manual 1801.6687.02 ─ 05
24.17.22.4 Decode results
In all BUS<m>:
USBThree:
RESult:FRAMe<n> commands, the suffix <m> selects the
serial bus and the suffix <n> selects the frame number in the decode table.
BUS<m>:USBThree:RESult:FCOunt?............................................................................ 2204
BUS<m>:USBThree:RESult:FRAMe<n>:INFO?.............................................................. 2204
BUS<m>:USBThree:RESult:FRAMe<n>:TYPE?............................................................. 2204
BUS<m>:USBThree:RESult:FRAMe<n>:STATe?.............................................................2205
BUS<m>:USBThree:RESult:FRAMe<n>:STARt?.............................................................2205
BUS<m>:USBThree:RESult:FRAMe<n>:STOP?............................................................. 2206
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:TYPE?.................................................2206
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:STATus?.............................................. 2206
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:STARt?................................................ 2207
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:STOP?.................................................2207
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:VAL?................................................... 2207
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:FVAL?................................................. 2208
BUS<m>:USBThree:RESult:FCOunt?
Returns the number of decoded frames in the selected serial bus.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
Usage: Query only
BUS<m>:USBThree:RESult:FRAMe<n>:INFO?
Returns specific frame information details of the selected frame. This information is
also shown in the "Info" column of the decode results table.
Suffix:
<m>
.
1..4
<n> *
Specifies the frame number.
Return values:
<Info>
Usage: Query only
BUS<m>:USBThree:RESult:FRAMe<n>:TYPE?
Returns the frame type for the selected serial bus and frame number.
Suffix:
<m>
.
1..4
Protocols
To Next Page
Loading...
