Remote control commands
R&S
®
RTO6
1300User Manual 1801.6687.02 ─ 05
<Color> ARGB value of the color to be used for the table entry.
ARGB=<Opacity(alpha) value><red value><green value><blue
value>, in hexadecimal or decimal format.
Range: 0 to 4294967295
Increment: 1
*RST: 0
Parameters for setting and query:
<ColorTableName> Color table to be edited
<Index> Index (row number) of the new entry in the color table
Usage: Asynchronous command
DISPlay:COLor:PALette:POINt:COUNt? <PaletteName>
Queries the number of entries in the color table.
Query parameters:
<PaletteName> color table
Usage: Query only
24.7.2.3 Grid appearance
DISPlay:DIAGram:GRID............................................................................................... 1300
DISPlay:DIAGram:LABels
.............................................................................................1300
DISPlay:DIAGram:FINegrid...........................................................................................1301
DISPlay:DIAGram:CROSshair.......................................................................................1301
DISPlay:DIAGram:YFIXed............................................................................................ 1301
DISPlay:DIAGram:XFIXed............................................................................................ 1301
DISPlay:DIAGram:GRID <Show>
If enabled, a grid is displayed in the diagram area.
Parameters:
<Show> ON | OFF
Usage: Asynchronous command
DISPlay:DIAGram:LABels <ShowLabels>
If enabled, labels mark values on the x- and y-axes in specified intervals in the dia-
gram.
Parameters:
<ShowLabels> ON | OFF
Usage: Asynchronous command
Instrument setup
To Next Page
Loading...
