Remote control commands
R&S
®
RTO6
1845User Manual 1801.6687.02 ─ 05
Parameters:
<CRCDataLength> Values ≠0 restrict allowed bit values in TRIGger<m>:
LIN:
ERRPattern to 0 and 1.
Range:
0 to 8
Increment: 1
*RST: 0
TRIGger<m>:LIN:STANdard <LINStandard>
Sets the LIN standard to trigger on CRC errors (TRIGger<m>:LIN:TYPE is set to
ERRC and TRIGger<m>:
LIN:CHKSerror is set ON.)
See also: "LIN standard" on page 606.
Parameters:
<LINStandard> V1X | V2X | J2602 | AUTO
*RST: AUTO
24.17.9.3 Decode results
To load and acivate a label list, use:
●
BUS<m>:
NEWList on page 1672
●
BUS<m>:SYMBols on page 1672
BUS<m>:LIN:FCOunt?................................................................................................. 1845
BUS<m>:LIN:FRAMe<n>:STATus?................................................................................1846
BUS<m>:LIN:FRAMe<n>:STARt?..................................................................................1846
BUS<m>:LIN:FRAMe<n>:STOP?.................................................................................. 1846
BUS<m>:LIN:FRAMe<n>:SDATa?................................................................................. 1847
BUS<m>:LIN:FRAMe<n>:SDEXport?.............................................................................1847
BUS<m>:LIN:FRAMe<n>:SYMBol?............................................................................... 1847
BUS<m>:LIN:FRAMe<n>:VERSion?..............................................................................1848
BUS<m>:LIN:FRAMe<n>:DATA?...................................................................................1848
BUS<m>:LIN:FRAMe<n>:IDSTate?............................................................................... 1848
BUS<m>:LIN:FRAMe<n>:IDValue?................................................................................1849
BUS<m>:LIN:FRAMe<n>:IDPValue?..............................................................................1849
BUS<m>:LIN:FRAMe<n>:SYSTate?.............................................................................. 1850
BUS<m>:LIN:FRAMe<n>:CSSTate?.............................................................................. 1850
BUS<m>:LIN:FRAMe<n>:CSValue?.............................................................................. 1850
BUS<m>:LIN:FRAMe<n>:BITRate?............................................................................... 1851
BUS<m>:LIN:FRAMe<n>:BYTE<o>:STATe?...................................................................1851
BUS<m>:LIN:FRAMe<n>:BYTE<o>:VALue?...................................................................1852
BUS<m>:LIN:FCOunt?
Returns the number of decoded frames.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols
To Next Page
Loading...
