R&S RTO6 - 24.17.7.6 Search results

Remote control commands
R&S
®
RTO6
1789User Manual 1801.6687.02 ─ 05
INRange | RANGe
This condition requires a range of endpoint values to be set
using SEARch:
TRIGger:
CMSB:FRAMe<m>:FLD<n>:IMIN and
SEARch:TRIGger:CMSB:FRAMe<m>:FLD<n>:IMAX.
*RST: INRange
Parameters for setting and query:
<SearchName>
24.17.7.6 Search results
SEARch:RESult:CMSB<m>:FCOunt?............................................................................ 1789
SEARch:RESult:CMSB<m>:FRAMe<n>:CCOunt?.......................................................... 1789
SEARch:RESult:CMSB<m>:FRAMe<n>:CELL<o>:NAME?.............................................. 1790
SEARch:RESult:CMSB<m>:FRAMe<n>:CELL<o>:STARt?.............................................. 1790
SEARch:RESult:CMSB<m>:FRAMe<n>:CELL<o>:STATe?.............................................. 1791
SEARch:RESult:CMSB<m>:FRAMe<n>:CELL<o>:STOP?...............................................1791
SEARch:RESult:CMSB<m>:FRAMe<n>:CELL<o>:VALue?.............................................. 1792
SEARch:RESult:CMSB<m>:FRAMe<n>:CONE?.............................................................1792
SEARch:RESult:CMSB<m>:FRAMe<n>:CTHRee?..........................................................1792
SEARch:RESult:CMSB<m>:FRAMe<n>:CTWO?............................................................ 1793
SEARch:RESult:CMSB<m>:FRAMe<n>:STARt?.............................................................1793
SEARch:RESult:CMSB<m>:FRAMe<n>:STATe?.............................................................1793
SEARch:RESult:CMSB<m>:FRAMe<n>:STOP?............................................................. 1794
SEARch:RESult:CMSB<m>:FRAMe<n>:TYPE?..............................................................1794
SEARch:RESult:CMSB<m>:FCOunt? <SearchName>
Returns the count number of decoded result frames in a custom serial bus waveform.
Basically, this is the maximum result index <n> when querying results by using
SEARch:RESult:CMSB<m>:FRAMe<n>:XXX.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:CMSB<m>:FRAMe<n>:CCOunt? <SearchName>
Returns the count number of cell in the frames, within the search result, in a custom
serial bus waveform.
Suffix:
<m>
.
*
Protocols