R&S RTO6 - 24.18.4 Trigger settings for digital signals and parallel buses; 24.18.4.1 General commands

Remote control commands
R&S
®
RTO6
2431User Manual 1801.6687.02 ─ 05
ACQuire:POINts:DVALue?
Returns the current digital record length used by each digital channel.
Return values:
<DigReclgth> Range: 1000 to 200E6
Increment: 2
*RST: 1000
Default unit: pts
Usage: Query only
Asynchronous command
24.18.4 Trigger settings for digital signals and parallel buses
In all TRIGger<m>:
PARallel commands, the trigger suffix <m> is always 1 and can
be omitted. It selects the trigger event: Only the A-trigger is available for triggering on
digital signals and parallel buses.
● General commands.............................................................................................2431
● Edge trigger.........................................................................................................2433
● Width trigger........................................................................................................2434
● Timeout trigger....................................................................................................2435
● Setup & Hold trigger............................................................................................2436
● State trigger.........................................................................................................2437
● Pattern trigger..................................................................................................... 2437
● Serial pattern trigger............................................................................................2440
24.18.4.1 General commands
TRIGger<m>:SOURce[:SELect].....................................................................................2431
TRIGger<m>:PARallel:TYPE.........................................................................................2432
TRIGger<m>:PARallel:SETHold:CSOurce[:VALue]..........................................................2433
TRIGger<m>:PARallel:STATe:CSOurce:VALue................................................................2433
TRIGger<m>:PARallel:SPATtern:CSOurce[:VALue]......................................................... 2433
TRIGger<m>:PARallel:EDGE:EXPRession[:DEFine]........................................................2433
TRIGger<m>:PARallel:WIDTh:EXPRession[:DEFine].......................................................2433
TRIGger<m>:PARallel:TIMeout:EXPRession[:DEFine].....................................................2433
TRIGger<m>:PARallel:STATe:EXPRession[:DEFine]........................................................2433
TRIGger<m>:PARallel:PATTern:EXPRession[:DEFine].....................................................2433
TRIGger<m>:PARallel:SPATtern:EXPRession[:DEFine]................................................... 2433
TRIGger<m>:SOURce[:SELect] <SourceDetailed>
Selects the source of the trigger signal.
Mixed signal option (MSO, R&S RT
O6-B1)