R&S RTO6 - 24.11.3 Peak search using cursors

Remote control commands
R&S
®
RTO6
1477User Manual 1801.6687.02 ─ 05
CURSor<m>:XDELta:INVerse?
Queries the inverse value of the delta value (distance) of the two vertical cursor lines.
Suffix:
<m>
.
1..4
Selects the cursor set.
Return values:
<DeltaInverse> Range: -100E+24 to 100E+24
*RST: 0
Default unit: Hz
Usage: Query only
Asynchronous command
CURSor<m>:YDELta[:VALue]?
Queries the delta value (distance) of the two horizontal cursor lines.
Suffix:
<m>
.
1..4
Selects the cursor set.
Return values:
<Delta> Range: -100E+24 to 100E+24
*RST: 0
Usage: Query only
Asynchronous command
CURSor<m>:YDELta:SLOPe <DeltaSlope>
Returns the inverse value of the voltage difference - the reciprocal of the vertical dis-
tance of two horizontal cursor lines: 1/
Δ V.
Suffix:
<m>
.
1..4
Selects the cursor set.
Parameters:
<DeltaSlope> Range: -100E+24 to 100E+24
Increment: 0
*RST: 0
Usage: Asynchronous command
24.11.3 Peak search using cursors
CURSor<m>:FFT
:SETCenter........................................................................................ 1478
CURSor<m>:FFT:TOCenter.......................................................................................... 1478
CURSor<m>:MAXimum[:PEAK].....................................................................................1478
Cursor measurements