R&S RTO6 - 24.17.11.4 SENT search settings

Remote control commands
R&S
®
RTO6
1916User Manual 1801.6687.02 ─ 05
BUS<m>:SENT:RDSL <RessDispSel>
Selects the results to be displayed.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<RessDispSel> TRSQ | SMSG | ALL
Transmission sequence, serial messages or all.
*RST
: ALL
BUS<m>:SENT:FRAMe<n>:BITRate?
Returns the bit rate of the selected frame.
Suffix:
<m>
.
1..4
<n> *
Return values:
<PrimaryBitRate> Range: 0 to 100000000000
Increment: 1
*RST: 0
Default unit: bps
Usage: Query only
24.17.11.4 SENT search settings
In search setup commands, you have to specify the <SearchName> parameter. It is a
string parameter that contains the search definition name. The commands are similar
to SENT trigger commands.
SEARch:
TRIGger:SENT:CALibration..............................................................................1917
SEARch:TRIGger:SENT:TRANsmission......................................................................... 1917
SEARch:TRIGger:SENT:SMSG.....................................................................................1917
SEARch:TRIGger:SENT:ERRor.....................................................................................1918
SEARch:TRIGger:SENT:TTYPe.....................................................................................1918
SEARch:TRIGger:SENT:STATus....................................................................................1919
SEARch:TRIGger:SENT:TDCN......................................................................................1919
SEARch:TRIGger:SENT:TDMN..................................................................................... 1919
SEARch:TRIGger:SENT:TDMX..................................................................................... 1920
SEARch:TRIGger:SENT:STYPe.................................................................................... 1920
SEARch:TRIGger:SENT:SIDType.................................................................................. 1920
SEARch:TRIGger:SENT:SICN.......................................................................................1921
SEARch:TRIGger:SENT:SIMN.......................................................................................1921
SEARch:TRIGger:SENT:SIMX.......................................................................................1921
SEARch:TRIGger:SENT:SDCN..................................................................................... 1922
SEARch:TRIGger:SENT:SDMN.....................................................................................1922
Protocols