Instrument setup
R&S
®
RTO6
106User Manual 1801.6687.02 ─ 05
Index
If enabled, inserts an index.
Remote command:
MMEMory:
AUTonaming:
INDex on page 1667
Time
If enabled, inserts the current time.
Remote command:
MMEMory:AUTonaming:TIME on page 1667
Default path for all file operations
Defines the default path displayed in the file selection dialog box for loading and stor-
ing operations. If a USB flash drive is connected, the path is set automatically to the
drive letter of the USB flash drive.
To switch the directory quickly, double-tap the input field. Use the symbols on the left of
the file explorer box to change the directory.
Remote command:
MMEMory:AUTonaming:DEFaultpath on page 1667
Reset
Resets the default file path to the factory default.
Remote command:
MMEMory:AUTonaming:RESPath on page 1667
MMEMory:AUTonaming:RESall on page 1667
4.8.1.2 Defining default file paths and names
When a save or load operation is performed, a default file name and path is provided.
You can configure which path is used and how the file name is generated. In the file
selection dialog box, you can change the folder and name as desired.
T
o define the default file path
1. Tap "Menu" > "Settings".
2. Select the "Save /Recall" tab.
3. Select the "Autonaming" tab.
4. Double-tap the "Default path for all file operations" field.
The directory selection dialog box is opened.
5. Select the folder in which the data is stored by default. Use the symbols on the left
of the file explorer box to switch to often used directories.
6. To restore the factory-set default path, tap "Reset" next to the path field.
To define the automatic file name pattern
The automatic file name pattern can consist of the following elements:
Save / recall
To Next Page
Loading...
