R&S RTO6 - 11.2.2.6 Timeout

Search functions
R&S
®
RTO6
427User Manual 1801.6687.02 ─ 05
Vertical condition
Defines the run of the signal relative to the window, see "V
ertical condition"
on page 202.
Remote command:
SEARch:TRIGger:WINDow:RANGe on page 1619
Time condition, Width, ±Delta
Set the time limit for the vertical condition, see:
●
"Time condition" on page 202
●
"Width" on page 202
●
"±Delta" on page 203
Remote command:
SEARch:TRIGger:WINDow:TIMerange on page 1620
SEARch:TRIGger:WINDow:WIDTh on page 1620
SEARch:TRIGger:WINDow:DELTa on page 1619
Upper level, Lower level
Set the upper and lower voltage thresholds. The amplitude of a runt crosses the first
threshold twice in succession without crossing the second one.
Remote command:
SEARch:TRIGger:LEVel:WINDow:UPPer on page 1621
SEARch:TRIGger:LEVel:WINDow:LOWer on page 1621
11.2.2.6 Timeout
The timeout search settings are the same as the timeout trigger settings. To apply the
trigger settings to search, tap Copy from trigger A'.
Search setup