R&S RTO6 - 24.12.12 Track and trend

Remote control commands
R&S
®
RTO6
1545User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..10
Parameters:
<FrameName>
MEASurement<m>:PROTocol:T2FRame:VALue <TrigFrmV
al>
Sets the value of the field for trigger to frame protocol measurement.
Suffix:
<m>
.
1..10
Parameters:
<TrigFrmVal>
Usage: Asynchronous command
24.12.12 Track and trend
MEASurement<m>:TRACk[:ST
ATe]............................................................................... 1545
MEASurement<m>:TRACk:DATA:HEADer?....................................................................1545
MEASurement<m>:TRACk:DATA:STYPe?..................................................................... 1546
MEASurement<m>:TRACk:DATA[:VALues]?...................................................................1546
MEASurement<m>:TRACk[:STATe] <State>
Enables the track functionality and displays the track.
The track functionality requires at least one option, see "Enable (Track)" on page 361.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page
1479.
Parameters:
<State> ON |
OFF
*RST: OFF
Usage: Asynchronous command
MEASurement<m>:TRACk:DATA:HEADer?
Returns the header of the track.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1479.
Usage: Query only
Automatic measurements