Remote control commands
R&S
®
RTO6
2125User Manual 1801.6687.02 ─ 05
Return values:
<WordType>
Usage: Query only
BUS<m>:TBTO:RESult:FRAMe<n>:WORD<o>:VALue?
Returns the data value for the selected word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word.
Return values:
<WordValue> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
24.17.20.3 Trigger
The trigger suf
fix <m> is always 1 and can be omitted. It selects the trigger event: Only
the A-trigger is available for triggering on serial buses.
To trigger on a serial bus, make sure that:
●
TRIGger<m>:SOURce[:SELect] is set to SBUS.
●
The sources of the serial bus are channel signals: use BUS<m>:...:SOURce
commands.
●
Decoding is enabled: BUS<m>[:STATe] is set to ON.
TRIGger<m>:TBTO:TRGLevel...................................................................................... 2126
TRIGger<m>:TBTO:TYPE.............................................................................................2126
TRIGger<m>:TBTO:CRC:CONDition..............................................................................2126
TRIGger<m>:TBTO:CRC:MAX......................................................................................2127
TRIGger<m>:TBTO:CRC:MIN.......................................................................................2127
TRIGger<m>:TBTO:DADDress:CONDition..................................................................... 2127
TRIGger<m>:TBTO:DADDress:MAX..............................................................................2128
TRIGger<m>:TBTO:DADDress:MIN...............................................................................2128
TRIGger<m>:TBTO:DATA:DCONdition...........................................................................2128
TRIGger<m>:TBTO:DATA:DMAX...................................................................................2129
TRIGger<m>:TBTO:DATA:DMIN....................................................................................2129
TRIGger<m>:TBTO:DATA:ICONdition............................................................................2129
TRIGger<m>:TBTO:DATA:IMAX....................................................................................2130
TRIGger<m>:TBTO:DATA:IMIN.....................................................................................2130
TRIGger<m>:TBTO:ERRor:CRC................................................................................... 2130
Protocols
To Next Page
Loading...
