R&S RTO6 - 24.17.9.4 LIN search settings

Remote control commands
R&S
®
RTO6
1852User Manual 1801.6687.02 ─ 05
NOEXists: byte does not exist
INSuf
ficient: the frame is not completely contained in the acqui-
sition. The decoded part of the frame is valid.
*RST
: OK
Usage: Query only
BUS<m>:LIN:FRAMe<n>:BYTE<o>:VALue?
Returns the value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte.
Return values:
<ByteValue> To set the value format, use FORMat:
BPATtern
.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 255
*RST: 0
Usage: Query only
24.17.9.4 LIN search settings
In search setup commands, you have to specify the <SearchName> parameter. It is a
string parameter that contains the search definition name. The commands are similar
to LIN trigger commands.
SEARch:TRIGger:LIN:SSOFrame
..................................................................................1853
SEARch:TRIGger:LIN:SFIDentifier.................................................................................1853
SEARch:TRIGger:LIN:IDENtifieror................................................................................. 1853
SEARch:TRIGger:LIN:SIDData......................................................................................1853
SEARch:TRIGger:LIN:SERRor......................................................................................1854
SEARch:TRIGger:LIN:WUFRame..................................................................................1854
SEARch:TRIGger:LIN:ICONdition..................................................................................1854
SEARch:TRIGger:LIN:IMIN...........................................................................................1855
SEARch:TRIGger:LIN:IMAX..........................................................................................1855
SEARch:TRIGger:LIN:IDOR<m>:ENABle.......................................................................1855
SEARch:TRIGger:LIN:IDOR<m>[:VALue]....................................................................... 1855
SEARch:TRIGger:LIN:DCONdition.................................................................................1856
SEARch:TRIGger:LIN:DMIN..........................................................................................1856
SEARch:TRIGger:LIN:DMAX........................................................................................ 1856
SEARch:TRIGger:LIN:BORDer......................................................................................1857
SEARch:TRIGger:LIN:DLECondition..............................................................................1857
Protocols