R&S RTO6 - 24.17.12.5 Search result settings

Remote control commands
R&S
®
RTO6
1953User Manual 1801.6687.02 ─ 05
NPOLl
T
riggers on a Normal POLL frame. Optionally you can define a
frame ID condition, a NM, a CT
, a DLC condition, a data pattern
condition and an index condition.
SLEEP
Triggers on a SLEEP frame. Optionally you can define a NM, a
CT, a data pattern condition and an index condition.
LONG
Triggers on a Long frame. Optionally you can define a frame ID
condition, a NM, a CT, a DLC extend condition, a data pattern
condition and an index condition.
LPOLl
Triggers on a Long POLL frame.
PID
Triggers on a Protected ID field. Optionally, you can define the
frame ID pattern.
PTYPe
Triggers on a Protected TYPE field.
PTPID
Triggers on a PType field followed by a PID field.Optionally, you
can define the frame ID pattern.
ERRor
Trigger on selected error types. Define the error types with:
SEARch:TRIGger:CXPI:ERRor:CRC on page 1949
SEARch:TRIGger:CXPI:ERRor:CRC on page 1949
SEARch:TRIGger:CXPI:ERRor:DLC on page 1950
SEARch:TRIGger:CXPI:ERRor:IBS on page 1950
SEARch:TRIGger:CXPI:ERRor:IFS on page 1950
SEARch:TRIGger:CXPI:ERRor:LENGth on page 1950
SEARch:TRIGger:CXPI:ERRor:PARity on page 1951
SEARch:TRIGger:CXPI:ERRor:UART on page 1951
*RST: STARt
Parameters for setting and query:
<SearchName>
24.17.12.5 Search result settings
The search on decoded CXPI data returns the same results as the queries for decode
results.
In search result commands, you have to specify the <SearchName> parameter
. It is a
string parameter that contains the search definition name.
For a description of the returned values, see the corresponding commands in Chap-
ter 24.17.12.3, "Decode results",
on page 1941.
Protocols