R&S RTO6 - 24.28.1 Base instrument; 24.28.2 Options

Remote control commands
R&S
®
RTO6
2582User Manual 1801.6687.02 ─ 05
24.28.1 Base instrument
Legacy command Replaced by Comment
EXPort:RESult:SELect
EXPort:RESult:NUMeric
EXPort:RESult:NAME
EXPort:RESult:SA
VE
Functionality is not supported.
Removed since FW 5.20
TRIGger<m>:OUT
:STATe TRIGger<m>:OUT:ACTion on page 1433 Replaced since FW 5.00
TRIGger<m>:SEQuence:MODE TRIGger<m>:SEQuence:TYPE
on page 1427
Replaced since FW 5.10
24.28.2 Options
Legacy command Replaced by Comment
I2C
TRIGger<m>:I2C:MODE TRIGger<m>:I2C:TYPE on page 1679 Replaced since FW 5.20
SPI
TRIGger<m>:SPI:MODE
SEARch:TRIGger:SPI:MODE
TRIGger<m>:SPI:TYPE on page 1713
SEARch:TRIGger:SPI:
TYPE on page 1721
Replaced since FW 5.20
Ethernet
SEARch:TRIGger:ETHernet:ERRor:SELect
SEARch:TRIGger:ETHernet:FRAMe:SELect
SEARch:TRIGger:ETHernet:TYPE
on page 2030
Replaced since FW 5.20
Advanced Jitter Analysis
ADVJitter<m>::RESult:TYPBathtub
ADVJitter<m>::RESult:TYPSynteye
Functionality is not supported.
ADVJitter<m>:SIGNal:UIOFfset ADVJitter<m>:
SIGNal:SAMTime
on page 2489
Replaced since FW 5.10
Deprecated commands