Instrument setup
R&S
®
RTO6
97User Manual 1801.6687.02 ─ 05
The larger the region, the easier is it to select an element. However, when selecting
data points, for example, a large frame does not allow you to select precisely
.
Drag threshold
Defines the maximum number of pixels around an element (e.g. data point) within
which your pointing device must stay to
"click" the element. When you tap or click a
specific element and move your finger or the mouse outside this range, it is considered
to be a "dragging" or "moving" operation.
Calibration
Opens the touchscreen calibration application. Only users with administrator rights can
fulfill this task.
4.5.4 LED
Access: "Settings" > "Frontpanel" > "LED".
Brightness
Defines the luminosity of illuminated front panel keys and knobs.
4.5.5 Aligning the touchscreen
When the device is delivered, the touchscreen is initially calibrated. However, to ensure
that the touchscreen responds to the finger contact correctly
, a touchscreen alignment
is required. Only users with administrator rights can fulfill this task.
Alignment of the touchscreen is useful:
●
At first use
●
If the position of the instrument has been changed, and you cannot look straight on
the screen
●
If another person operates the instrument
●
If you notice, that touching a specific point on the screen does not achieve the cor-
rect response
1.
In the "Menu" > "Settings" menu, select "Frontpanel".
Frontpanel settings
To Next Page
Loading...
