R&S RTO6 - 24.10.4 History

Remote control commands
R&S
®
RTO6
1461User Manual 1801.6687.02 ─ 05
24.10.4 History
CHANnel<m>[:W
A
Veform<n>]:HISTory[:STATe]...............................................................1461
ACQuire:AVAilable?......................................................................................................1461
CHANnel<m>[:WAVeform<n>]:HISTory:CURRent............................................................1461
CHANnel<m>[:WAVeform<n>]:HISTory:STARt................................................................ 1462
CHANnel<m>[:WAVeform<n>]:HISTory:STOP.................................................................1462
CHANnel<m>[:WAVeform<n>]:HISTory:TPACq............................................................... 1463
CHANnel<m>[:WAVeform<n>]:HISTory:PLAY................................................................. 1463
CHANnel<m>[:WAVeform<n>]:HISTory:REPLay..............................................................1463
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?.............................................................1464
CHANnel<m>[:WAVeform<n>]:HISTory:TSABsolute?.......................................................1464
CHANnel<m>[:WAVeform<n>]:HISTory:TSRelative?........................................................1464
CHANnel<m>[:WAVeform<n>]:HISTory:TSRReference?.................................................. 1465
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe] <State>
Enables or disables the history display.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:W
A
Veform<n>] is omitted, waveform 1
is adressed.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
ACQuire:AVAilable?
Returns the number of acquisitions that is saved in the memory. This number of
acquisitions is available for history viewing. It is also the number of acquisitions in a
fast segmentation acquisition series.
Return values:
<AcquisitionCount>
Range: 0 to 4294967295
Usage: Query only
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:CURRent <CurrAcqIdx>
Accesses a particular acquisition in the memory to display it. The query returns the
index of the segment that is shown.
Waveform analysis