R&S RTO6 - Page 1464

Remote control commands
R&S
®
RTO6
1464User Manual 1801.6687.02 ─ 05
<n> 1..3
Selects the waveform. If [:W
A
Veform<n>] is omitted, waveform 1
is adressed.
Parameters:
<AutoRepeat> ON | OFF
*RST: OFF
Usage: Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?
Returns the date of the current acquisition that is shown in the history viewer
(CHANnel<m>[:
WAVeform<n>]:
HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WA
Veform<n>] is omitted, waveform 1
is adressed.
Return values:
<DateAbsString> String with date of the current acquisition (absolute time)
Usage: Query only
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSABsolute?
Returns the abolsute daytime of the current acquisition that is shown in the history
viewer (CHANnel<m>[:WAVeform<n>]:
HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WA
Veform<n>] is omitted, waveform 1
is adressed.
Return values:
<TimeAbsString> String containing the time and unit
Usage: Query only
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSRelative?
Returns the relative time of the current acquisition - the time difference to the newest
acquisition (index = 0).
See also: (
CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Waveform analysis