Getting started
R&S
®
RTO6
30User Manual 1801.6687.02 ─ 05
Figure 3-1: Front panel of R&S
RTO6
1 = Touchscreen
2 = [Trigger] controls
3 = [Horizontal] controls
4 = [Vertical] controls
5 = [Analysis] keys
6 = Input channels
7 = [Aux Out] connector
8 = Connectors for probe compensation and grounding
9 = USB connectors
10 = [Power] key
3.2.1.1 Input connectors
The R&S R
T
O6 has four channel inputs to connect the input signals using active and
passive probes.
The input connectors are provided with a special Rohde & Schwarz active probe inter-
face, and they are BNC compatible. Thus, the instrument can automatically detect pas-
sive probes with standard BNC connector and active Rohde & Schwarz probes having
the Rohde & Schwarz probe interface.
The input impedance is selectable, the values are 50 Ω and 1 MΩ.
The maximum input voltage is 200 V peak, 150 V RMS at 1 MΩ input impedance and
5 V RMS at 50 Ω input impedance.
Instrument tour
To Next Page
Loading...
