R&S RTO6 - 24.17.26.3 Decode results

Remote control commands
R&S
®
RTO6
2339User Manual 1801.6687.02 ─ 05
24.17.26.3 Decode results
In all BUS<m>:
EBTB:
SYMBol<n> commands, the suffix <m> selects the serial bus and
the suffix <n> selects the symbol in the decode table.
BUS<m>:EBTB:SYMBol<n>:DATA?...............................................................................2339
BUS<m>:EBTB:SYMBol<n>:STARt?..............................................................................2339
BUS<m>:EBTB:SYMBol<n>:STATus?............................................................................2340
BUS<m>:EBTB:SYMBol<n>:STOP?..............................................................................2340
BUS<m>:EBTB:SYMBol<n>:BYTE?.............................................................................. 2340
BUS<m>:EBTB:SYMBol<n>:KDCode?...........................................................................2341
BUS<m>:EBTB:SYMBol<n>:TENBit?.............................................................................2341
BUS<m>:EBTB:SYMBol<n>:DATA?
Returns the data of the specified symbol.
The format is determined by the remote command BUS<m>:EBTB:DISF.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Data>
Example:
BUS<m>:EBTB:DISF EB
BUS:EBTB:
SYMBol5:
DATA?
<-- BC+
Example:
BUS<m>:EBTB:DISF KD
BUS:EBTB:SYMBol5:
DATA?
<-- K28.5+
Example:
BUS<m>:EBTB:DISF TB
BUS:EBTB:SYMBol5:
DATA?
<-- 305
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:STARt?
Returns the start time of the specified symbol.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Protocols