R&S RTO6 - 24.24.3 Components; 24.24.3.1 General settings

Remote control commands
R&S
®
RTO6
2562User Manual 1801.6687.02 ─ 05
Parameters:
<Path> String with path and file name with extension .xml
Usage: Asynchronous command
DEEMbedding<m>:SAVE
Saves the deembedding configuration to the file specified with DEEMbedding<m>:
NAME.
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Usage: Event
DEEMbedding<m>:OPEN
Opens and loads the deembedding configuration from the file specified with
DEEMbedding<m>:NAME.
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Usage: Event
DEEMbedding<m>:DELete
Deletes the deembedding configuration file specified with DEEMbedding<m>:NAME
.
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Usage: Event
24.24.3 Components
● General settings..................................................................................................2562
● DUT settings
....................................................................................................... 2564
● R&S RT‑ZM probe settings.................................................................................2565
● Cable, adapter, fixture and custom settings........................................................2567
24.24.3.1 General settings
DEEMbedding<m>:COMPonent<n>[:STATe] <IsEnabled>
Enables or disables the indicated component for deembedding.
The first and the last component are always enabled and cannot be disabled.
Deembedding (option R&S RT
O6-K121)